Windows setup error: Cannot install the HighPoint NVMe Controller (SSD7000 Series Boot-RAID configuration).
Written by Support Team
Updated at February 8th, 2021
- Tutorial Videos & Installation Guides
-
FAQ
FnL Product Line Determining PCIe lane assignment for your SSD7000 Controller MacOS Windows Linux SSD6200 Series Controller SSD7000 Series Controller RocketStor Series RocketRAID Series RocketU Series Motherboard Compatible Report Other Questions Standard Responses for Known Issues or Subjects WebGUI eStore Gen5
- HPT
- Compatibility Reports
- FAQ
- Workaround Issue
When attempting to install Windows 10 to an NVMe SSD or array hosted by the SSD7000 series controller, Windows Setup reports the following error:
What causes this problem?
Windows Setup may report this error if other NVMe devices are connected to the motherboard (either directly to the motherboard or via another PCIe device) while installing the operating system.
Solution:
Before installing Windows to an NVMe SSD or array hosted by the SSD7000 controller, make sure all other NVMe devices are removed from the system until Windows Setup is complete. Once Setup is complete, and Windows can be successfully booted from the SSD7000 controller, these devices can be reinstalled.