How can I check the status of my RAID array?
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
- Tutorial Videos & Installation Guides
FnL Product Line Determining PCIe lane assignment for your SSD7000 Controller MacOS Windows Linux SSD6200 Series Controller SSD7000 Series Controller RocketStor Series RocketRAID Series RocketU Series Motherboard Compatible Report Other Questions Standard Responses for Known Issues or Subjects WebGUI eStore
- Compatibility Reports
- Workaround Issue
You can check the status of the RAID array using the HighPoint’s CLI or WebGUI Management Software.
1. Logical tab
This tab provides information about hosted RAID configurations. The Status column reports the overall condition of the array:
CLI Command – you can use the following command to check the status of the RAID array:
HPT CLI> query arrays
2. Event tab (WebGUI) / Event Log (CLI)
The Event log records any event associated with RAID arrays and hosted drives. The term “Event” can refer to an error, status change, or action:
3. Error Alarm
RAID controllers and enclosures equipped with an audible alarm will emit a warning signal in the event of a disk failure. This option can be disabled or enabled under the Setting tab.
4. Email Notification
The WebGUI and CLI can be configured to send email messages whenever an event, warning or error is recorded to the Event Log. To configure Email Notification, access the Settings tab:
For more information about configuring Email notification, please refer to the following Online Knowledge Base article: https://highpoint-technologies-inc.helpjuice.com/142471-other-question/re-kb-p-how-to-set-up-webgui-email-notification-v102-01-01-05