Contact Us
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
SSD NVMe
- Tutorial Videos & Installation Guides
-
FAQ
FnL Product Line Determining PCIe lane assignment for your SSD7000 Controller MacOS Windows Linux SSD6200 Series Controller SSD7000 Series Controller RocketStor Series RocketRAID Series RocketU Series Motherboard Compatible Report Other Questions Standard Responses for Known Issues or Subjects WebGUI eStore
- HPT
- Compatibility Reports
- FAQ
- Workaround Issue
SSD NVMe General Questions
- Do HighPoint NVMe RAID controllers support M.2 NVMe SSD’s with built in heat sinks?
- Can your NVMe RAID solutions support non-RAID NVMe configurations?
- Do I need to install SSD Manufacturer provided drivers when using HighPoint NVMe RAID solutions?
- SSD7000/SSD7500 Series Controllers - How to load the UEFI ROM manually
- HighPoint SSD Series M.2 NVMe RAID Controllers M.2 Compatibility
- Slow NVMe performance while using an SSD7000/7500/6200 series NVMe RAID AIC (Windows)
- The RAID Verification or Rebuild session suddenly stops
- The RAID Verification or Rebuild session suddenly stops
- How do I use the Fan Control feature of the SSD7000/7500 series NVMe RAID controller?
- The RAID Verification or Rebuild session suddenly stops
- The RAID Verification or Rebuild session suddenly stops
SSD6200
- SSD6200 cannot be recognized in CLI-ESXI
- ESXi: The CLI does not recognize any SSDs
- What are the differences between different RAID creation methods?
- What kind of RAID creation tools are available for SSD6200 series controllers?
- What are the differences between different RAID creation methods ?
- Why does a RAID array created with the RAID Switch still exist after it is deleted from the system?
- Does the SSD6200 series support Cross-sync?
- Why does WEBGUI/CLI/OOB/HII/UEFI have information about a single disk, but no disk partition is visible in the OS?
- What causes the alarm buzzer to sound? How do I turn it off?
- What do the LEDs indicate?
- Why is "No controller found" displayed when I use the CLI on ESXi?
Popular Articles
- Which benchmark utilities are recommended for testing NVMe transfer performance in a Linux Environment?
- Replacing a disk of a bootable RAID 1 array (Windows)
- Disabling macOS Secure boot and SIP for T2 Systems
- How to resolve “failed to map pci bar” error in dmesg
- How to recover Samsung 980 PRO TurboWrite Performance in a Windows Environment
- RocketRAID & RocketStor Driver Installation Troubleshooting Guide (Windows)
- Why HighPoint SSD7500, SSD7000 Series NVMe RAID controller do not support RAID 5 and 6?
- How to Avoid NVMe related Overheating Issues
- Can M.2 NVMe SSDs be hot swapped?